Comparison ledger
Accretech , Tokyo Semitsu Kogaku (TSK) UF3000, Asyst Versaport 2200 Indexer, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | , Tokyo Semitsu Kogaku (TSK) UF3000Accretech | |
|---|---|---|
| OEM | Accretech | Asyst |
| Category | — | — |
| Wafer size | Wafer Equipment | 2nd EPROM has the firmware for wafer cassettes (in spare) |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Accretech , Tokyo Semitsu Kogaku (TSK) UF3000 | Asyst Versaport 2200 |
| Specifications | ||
| Wafer size | Wafer Equipment[1] | 2nd EPROM has the firmware for wafer cassettes (in spare)[4] |
| Currently Configured for | 300mm[1] | — |
| With Chiller | SCU-600B[1] | — |
| Section 1 | Tool General Information[1] | — |
| Section 2 | Tool Specific Information[1] | — |
| Manufacturer | Accretech, Tokyo Semitsu Kogaku (TSK)[1] | Asyst[4] |
| Model | UF3000[1] | Versaport 2200[4] |
| Category | Wafer Equipment[1] | — |
| Equipment type | Wafer Prober[1] | — |
| Tool status | In production[1] | — |
| Tool location | Cleanroom[1] | — |
| Chiller | SCU-600B[1] | — |
| Vendor tool serial number | F24006MZ[1] | — |
| Micron MISTI/LID number | FE3SKAA300(TMM)[1] | — |
| Year | 2004[2] | — |
| Quantity | 9[3] | — |
| Short description | Fully Automated Prober[3] | — |
| Version | 300 mm[3] | — |
| Nickel chuck | 12 inch[3] | — |
| Front loading | 300 mm single FOUP loading[3] | — |
| Robot blade | Dual ceramic robot blade[3] | — |
| Software version | S5.0FC4[3] | — |
| Loader type | TSK[3] | — |
| Chuck temperature range | 30~150℃[3] | — |
| OCR camera type | Type6[3] | — |
| Auto card change | Yes[3] | — |
| Needle cleaning unit | 150 mm x 150 mm ceramics pad[3] | — |
| Manipulator | Hinge, MHF4000[3] | — |
| Test system interface | AL6050 & Focus3000[3] | — |
| Includes | Printer[3] | — |
| P.N | — | 9700-5384-01 REV.4- used for both mask cassettes and wafer cassettes[4] |
| Configuration | — | 2 EPROM chips:[4] |
| Part number | — | 9700-5384-01 REV.4[4] |
| Cassette type | — | 8” Cassette[4] |
| Mounting configuration | — | Bolt Back Plate[4] |
| RFID support | — | RFID Smart Tag support[4] |
| Firmware | — | 2 EPROM chips; 1st EPROM has firmware for mask cassettes (installed currently), 2nd EPROM has firmware for wafer cassettes (in spare)[4] |
| Cassette compatibility | — | Used for both mask cassettes and wafer cassettes[4] |
| Condition | — | Refurbished[4] |
| Sensor adjustment | — | The user just needs to adjust the sensor parameters via ISIM to work with your cassettes[5] |
| Technical manual | — | VersaPort 2200 Technical Manual, P/N 2000-1252-01, Rev. C, dated 6/12/2007[6] |