Comparison ledger
Applied Materials 0010-22161 High EFF RF Match, Plasma-Therm Powermax125, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0010-22161 High EFF RF MatchApplied Materials | Powermax125Plasma-Therm |
|---|---|---|
| OEM | Applied Materials | Plasma-Therm |
| Category | — | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0010-22161 High EFF RF Match | Plasma-Therm Powermax125 |
| Specifications | ||
| Make | Applied Materials[1] | — |
| Model | 0010-22161[1] | — |
| Description | HTESC PH 1 REV A[2] | — |
| Condition | Used[2] | — |
| Stock Number | BM6628[2] | — |
| OEM | — | Hypertherm[3] |
| Product line | — | Powermax[3] |
| Max current class | — | 125 amps and less[3] |
| Capabilities | — | Handheld and automated cutting, marking, and gouging[3] |
| Output current | — | 30–125 A[4] |
| Rated output voltage | — | 175 VDC[4] |
| Duty cycle | — | 100% @ 125 A, 480/600 V, 3-PH (CSA)[4] |
| Input voltage (CSA) | — | 480/600 V, 3-PH, 50/60 Hz (±10%)[4] |
| Input current @ 12.2 kW (CSA) | — | 31/24 A at 480/600 V[4] |
| Open circuit voltage (CSA) | — | 320 VDC[4] |
| Weight (CSA, 480 V, with 7.6 m torch) | — | 47.9 kg (105.7 lbs)[4] |
| Weight (CSA, 600 V, with 7.6 m torch) | — | 47.5 kg (104.7 lbs)[4] |
| Dimensions with handles | — | 483 mm D; 233 mm W; 430 mm H (19" D; 9.2" W; 17" H)[4] |
| Gas supply | — | Clean, dry, oil-free air or nitrogen[4] |
| Gas inlet flow/pressure (cutting) | — | 260 l/min (550 scfh) @ 5.9 bar (85 psi)[4] |
| Gas inlet flow/pressure (gouging) | — | 212 l/min (450 scfh) @ 4.1 bar (60 psi)[4] |
| Input power cable length | — | 3 m (10')[4] |
| Power supply type | — | Inverter – IGBT[4] |
| Electrical efficiency | — | 91%-92%[4] |
| Cut capacity (recommended) | — | 38 mm (1-1/2") at 457 mm/min (18 ipm); 44 mm (1-3/4") at 250 mm/min (10 ipm)[4] |
| Severance cut capacity (hand cutting) | — | 57 mm (2-1/4") at 125 mm/min (5 ipm)[4] |
| Pierce rating | — | 25 mm (1") with handheld use or automatic torch height control[4] |
| Gouge metal removal rate (typical) | — | 12.52 kg/hr (27.6 lbs/hr) with groove profile 4.3–7.9 mm D x 6.1–9.9 mm W[4] |