Comparison ledger
Applied Materials 0010-47763 ASSY ESC Bonded Monopolar Dual Heated, Kulicke & Soffa IBond 5000, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0010-47763 ASSY ESC Bonded Monopolar Dual HeatedApplied Materials | IBond 5000Kulicke & Soffa |
|---|---|---|
| OEM | Applied Materials | Kulicke & Soffa |
| Category | Packaging & Bonding | Packaging & Bonding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | 2021 Vintage |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0010-47763 ASSY ESC Bonded Monopolar Dual Heated | Kulicke & Soffa IBond 5000 |
| Cited variants | — | |
| Specifications | ||
| Configuration | Refurbished[2] | Ball-wedge bonding capability[3] |
| Spool Size | — | Ball bonding 2" x 1" double flange spool[3] |
| Bonding Area | — | 135 x 135 mm (5.3 x 5,3 ")[3] |
| Throat Depth | — | 143 mm (5.6")[3] |
| Gross Table Motion | — | 14 mm (o.55")[3] |
| Bonding capability | — | Ball-wedge[3] |
| Power supply | — | 100-240 V, 50/60 Hz[3] |
| Wire feed angle | — | 90 degrees, vertical feed[3] |
| Spool size (ball bonding) | — | 2" x 1" double flange spool[3] |
| Gold wire diameter | — | 0.7 mil to 3.0 mil (17 to 75 microns)[3] |
| Copper wire diameter | — | 0.7 mil to 2 mil (12 to 50 microns)[3] |
| Bonding tool capillary lengths | — | 0.375", 0.437", 0.625"[3] |
| Bonding area (XY table) | — | 135 x 135 mm (5.3 x 5.3 inches)[3] |
| Throat depth | — | 143 mm (5.6 inches)[3] |
| Gross table motion | — | 14 mm (0.55 inches)[3] |
| Fine table motion | — | 14 mm (0.55 inches)[3] |
| Mouse ratio | — | 6:1[3] |
| Motorized Y setback | — | up to 4 mm (160 mil)[3] |
| Motorized Y reverse | — | up to 0.25" (10 mil)[3] |
| Motorized Y kink height | — | up to 0.5 mm (20 mil)[3] |
| Z axis travel | — | 0.500" (12.5 mm)[3] |
| Ultrasonic transducer frequency | — | 60 kHz[3] |
| Ultrasonic generator | — | Phase Lock Loop self-tuning[3] |
| Low ultrasonic power | — | 1.3 watts[3] |
| High ultrasonic power | — | 2.5 watts[3] |
| Bond time range | — | 10-1000 milliseconds (selectable ranges 10-100 ms and 10-1000 ms)[3] |
| Bond force range | — | 10-250 grams (requires added weights >80 grams), force coil range 3-80 grams[3] |
| Wire termination | — | Programmable tail pull for ball bonding[3] |
| Temperature control range | — | up to 250°C, +/-5°C[3] |
| Fine Table Motion | — | 14 mm (0.55")[3] |
| Equipment type | — | Wire bonder[4] |
| Make | — | K&S[4] |
| Model | — | IBond 5000[4] |
| Input power | — | 100-240 V, 50/60 Hz[3] |
| Ball bonding capillary lengths | — | 0.375", 0.437", 0.625"[3] |
| Ultrasonic system | — | High Q 60kHz K&S transducer[3] |
| Temperature control | — | Built-in; range up to 250 C, +/- 5 C[3] |
| Vintage | — | 2021[5] |
| OEM | — | Kulicke & Soffa (K&S)[4] |
| Power requirement | — | 100-240 V, 50/60 Hz[3] |
| Ultrasonic transducer | — | High Q 60 kHz K&S transducer[3] |
| Bond force | — | 10-250 grams[3] |
| Bond force coil range | — | Added 3-80 grams[3] |
Plan your fab
Building a Packaging & Bonding process? Get a complete equipment list.
Open the fab equipment planner →