Comparison ledger
Branson 101-149-053 Gold Booster, Kulicke & Soffa 4124 Ball, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 101-149-053 Gold BoosterBranson | 4124 BallKulicke & Soffa |
|---|---|---|
| OEM | Branson | Kulicke & Soffa |
| Category | Packaging & Bonding | Packaging & Bonding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Branson 101-149-053 Gold Booster | Kulicke & Soffa 4124 Ball |
| Specifications | ||
| Configuration | 1:1.5[1] | — |
| Manufacturer | Branson[2] | Kulicke & Soffa[4] |
| Model | 101-149-053[2] | 4124 Ball[4] |
| Type | Gold Booster[2] | — |
| Operating frequency | 20 kHz[3] | — |
| Gain | 1:1.5[2] | — |
| Mounting thread | 1/2-20[3] | — |
| Length | 5.4 in[3] | — |
| Gain ratio | 1:1.5[2] | — |
| Equipment type | — | Ball Wire Bonder[4] |
| Bond wire material | — | Gold wire[5] |
| Bonding mode | — | Semi-auto, Manual[5] |
| Bonding area | — | 152 x 152 mm (6 x 6 inch)[5] |
| Throat depth | — | 143 mm (5.6 inch)[5] |
| Gross table motion | — | 140 mm (5.5 inch)[5] |
| Fine table motion | — | 14 mm (0.55 inch)[5] |
| Mouse ratio | — | 6:1[5] |
| Z-motion system | — | DC servo/LVDT control[5] |
| Z travel | — | 9.1 mm[5] |
| Ultrasonic system | — | High Q 60 kHz transducer; PLL ultrasonic generator[5] |
| Low ultrasonic power | — | 1.3 W[5] |
| High ultrasonic power | — | 2.5 W[5] |
| Bond time | — | 10-100 msec / 10-1000 msec[5] |
| Single Point TAB | — | Available[5] |
| Bond force | — | Force coil 10-160 g[5] |
| Wire diameter | — | 17.5 µ to 75 µ[5] |
| Spool size | — | 2"[5] |
| Maximum work-piece size | — | About 3 inches square[6] |
| Search position height | — | 75-125 um above the bond site level[7] |
| Wire Material | — | Gold[5] |
| Wire Diameter Range | — | 17.5 to 75 µm[5] |
| Spool Size | — | 2 inch[5] |
| Modes of Operation | — | Semi-auto, Manual Z[5] |
| Deep Access Option | — | 0.0650" length Capillary[5] |
Plan your fab
Building a Packaging & Bonding process? Get a complete equipment list.
Open the fab equipment planner →