Comparison ledger
Dek NeoHorizon 03 ix, Speedline Momentum Elite, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | Momentum EliteSpeedline | |
|---|---|---|
| OEM | Dek | Speedline |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Dek NeoHorizon 03 ix | Speedline Momentum |
| Cited variants | — |
|
| Specifications | ||
| Operating System | Win7+09SP16[3] | — |
| Tooling | Magnetic tooling pins[3] | — |
| Camera type | Hawkeye 750[3] | — |
| Configuration | 400 mm cleaning unit[3] | 50/60 Hz[5] |
| Board foil clamp size | 500mm[3] | — |
| Transport System Type | Front Rail Fixed and board clamp[3] | — |
| Transport System Direction | System setup[3] | — |
| PCB thickness | 0.2-6mm[3] | — |
| PCB Weight | 0-1kg[3] | — |
| Screen Frame Size | 736x736mm[3] | — |
| Print Modes | Standard Print head[3] | — |
| Machine Alignment Capability | 2.0@±25microns[3] | — |
| Voltage | AC 220V 50/60Hz[3] | — |
| Largest Single Load | — | 6 Amps[5] |
| Full Load Current | — | 10 Amps[5] |
| Maximum Board Size (X x Y) | — | 609.6 mm x 508 mm (24" x 20")[1] |
| Maximum Board Size (X x Y) in Staging Mode (Momentum Elite) | — | 457 mm x 508 mm (18" x 20")[1] |
| Minimum Board Size (X x Y) | — | 50.8 mm x 50.8 mm (2" x 2")[1] |
| Board Thickness | — | 0.2 mm (0.008") to 5.0 mm (0.20"), up to 6.0 mm (0.24") without top clamp foils[1] |
| Maximum Print Area (X x Y) | — | 609.6 mm x 508 mm (24" x 20")[1] |
| Print Gap (Snap-off) | — | 0 mm to 6.35 mm (0" to 0.25")[1] |
| Stencil Frame Size | — | 737 mm x 737 mm (29" x 29")[1] |
| Vision Field-of-View (FOV) | — | 106 mm x 8 mm[1] |
| Total System Alignment | — | 12.5 microns[1] |
| Alignment Repeatability | — | ±0.0005" at 6 sigma, Cpk of greater than or equal to 2.0[1] |
| Power Requirements | — | 200 to 240 VAC Single Phase 50/60Hz[1] |
| Air Supply | — | 100 PSI at 4 CFM[1] |
| Dimensions (W x D x H) | — | 1675.5 mm (65.96") x 1593.1 mm (62.72") x 1638.4 mm (64.5")[1] |
| Machine Weight | — | 899 kg (1982 lbs)[1] |
| Wet Print Accuracy | — | 20 microns @ 6 sigma, Cpk > 2[6] |
| Maximum Board Weight | — | 4.5 kg (9.92 lbs)[6] |
| Board Edge Clearance | — | 3.0 mm (0.118")[6] |
| Underside Clearance | — | 12.7 mm (0.5") standard / Configurable for 25.4 mm (1.0")[6] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →