Comparison ledger
Accretech UF 200 S, Cascade Microtech 103-754, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | UF 200 SAccretech | 103-754Cascade Microtech |
|---|---|---|
| OEM | Accretech | Cascade Microtech |
| Category | Test & Probe | Test & Probe |
| Wafer size | 200mm | 6-inch diameter microchamber and thermal chuck |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Accretech UF 200 | Cascade Microtech 103-754 |
| Specifications | ||
| Air | Over 0.45 MPa[1] | — |
| Vacuum | Over -53K MPa[1] | — |
| Voltage | 208 VAC, Single Phase[1] | — |
| Frequency | 50/60Hz[1] | — |
| Wiring Configuration | 2Wire + Ground[1] | — |
| Full Load AMPS | 7.2A[1] | — |
| Main Breaker Rating | 10A[1] | — |
| Interrupt Current | 10KA A.I.C[1] | — |
| Diagram Number | FE06000[1] | — |
| Configuration | Yield Check Function[1] | — |
| Loader, Wafer Handling | Backside Holding[1] | — |
| Wafer Size | 5",6",8", Currently 8"(200mm) Configured[1] | — |
| X/Y axis | Probing Area(±120mm), Maximum Speed(200m/s)[1] | — |
| Power Consumption | Approximately 1.5kVA[1] | — |
| Air Supply Source Pressure | 0.45Mpa or more[1] | — |
| Manipulator | MHF300L[1] | — |
| Weight (Main Body) | 900kg (Standard)[1] | — |
| Make | Accretech / TSK[2] | — |
| Model | UF 200 S[2] | — |
| Wafer Sizes | 8 inch[2] | — |
| HOT Chuck | Present[1] | — |
| GPIB Interface | Present[1] | — |
| Yield Check Function | Present[1] | — |
| FAIL Check Function | Present[1] | — |
| type | — | x-y-z-θ probe positioner[4] |
| installed on | — | HFTL 50-GHz Small-Signal Probe Station[4] |
| quantity in station | — | two[4] |
| station chuck size | — | 6-inch-diameter microchamber and thermal chuck[4] |
| Quantity per station | — | Two positioners[4] |
| Chuck size | — | 6-inch-diameter microchamber and thermal chuck[4] |
| Temperature range | — | -50 to 200 °C[4] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →