Comparison ledger
Thermo Fisher 1300 Series Safety, Tousimis Automegasamdri 915B, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 1300 Series SafetyThermo Fisher | Automegasamdri 915BTousimis |
|---|---|---|
| OEM | Thermo Fisher | Tousimis |
| Category | Wet Processing / Clean | Wet Processing / Clean |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | 2026 Third-party support only | — |
| Control system | — | — |
| Generation | — | — |
| Family | Thermo Fisher 1300 | Tousimis Automegasamdri 915B |
| Specifications | ||
| Configuration | Class II[1] | — |
| Cabinet type | Class II, Type A2 biological safety cabinet[2] | — |
| Airflow compensation | SmartFlow airflow compensation system[2] | — |
| Motors | Dual DC motors[2] | — |
| Front window design | SmartClean front window design[2] | — |
| Control panel | Intuitive control panel with constant readout of downflow and inflow velocities and filter reserve status[2] | — |
| UV light | Programmable UV light[2] | — |
| SmartPort | SmartPort convenience for routing tubing and cables through the side walls[2] | — |
| Available widths | 3-foot, 4-foot, 5-foot, and 6-foot sizes[2] | — |
| Front opening choices | 8-inch or 10-inch front opening[2] | — |
| Filter specification | H14 HEPA filters, EN 1822, 99.995% @ MPPS[3] | — |
| Certification | NSF/ANSI 49, UL, CE[3] | — |
| Service valves | Up to 6 total, 3 on each side wall[3] | — |
| Equipment type | — | Critical point dryer[4] |
| Process mode | — | Samples are dried at the CO2 supercritical point[4] |
| Starting medium | — | Ultra pure ethanol[4] |
| Chamber pressure before opening | — | 0 psi[4] |
| Operation modes mentioned | — | Auto Mode, HEAT, BLEED, VENT, COOL[4] |
| Type | — | Automated critical point drying system[5] |
| Substrate size | — | Up to 150 mm wafer[5] |
| Manufacturer location | — | Rockville, MD, United States[6] |
| Use | — | Drying freshly released structures with minimum sticking issues[4] |
| Drying medium | — | CO2 at the supercritical point[4] |
Plan your fab
Building a Wet Processing / Clean process? Get a complete equipment list.
Open the fab equipment planner →