Brooks

The Brooks / PRI DBM 2706 is an atmospheric wafer handling robot with a dual-arm configuration.

The Brooks 4900 Series Adapter is a 125 amp A to S conversion adapter. The Brooks 4900 Series Adapter is molded from fiberglass-reinforced polyester. The Brooks 4900 Series Adapter is rated NEMA 3R for indoor and outdoor use.

Brooks / PRI DBM 2407 is an atmospheric wafer handling robot with a dual-arm configuration.

The Brooks EKD-13J is a deep profile meter interbase adapter designed to provide extra space for additional components and devices.

The Brooks R A-6JR-G2 is a right angle adapter for installations that are difficult to read due to an awkward location or obstructed view.

The Brooks Fixload 25 Load Port is a semiconductor equipment product from Brooks, model Fixload 25.

The Brooks / PRI ABM 205 is an atmospheric wafer handling robot described as a single-arm system for 6-inch and 12-inch wafers.

Brooks 017-0146-01 is a prealigner manufactured by Brooks.

The Brooks 017-0900-01 is a wafer transfer robot.

The Brooks PRE 300 / 300 B / 301 / 301 B Wafer Pre-Aligner is a wafer pre-aligner for 12-inch wafers, categorized under lithography.

The Brooks GX Wafer is a wafer handler used in semiconductor test and probe applications.

The Brooks Fixload 6 M Load Port is a 300 mm SMIF load port.

The Brooks MTX 2000 Wafer Sorter is a wafer sorting system that includes 2x Fixload V6, a Multiple IOSS Wafer ID Reader, 2x Brooks Robots, 2x Brooks Aligner, and a Greenlight Inspection Station.

The Brooks 1402 is a 65 amp adapter. The Brooks 1402 is designed to install single phase socket type meters on bottom-connected overall sheet-metal enclosures where the lowest profile is important.

The Brooks / PRI PRE 200 / 200 B / 201 / 201 B is a wafer pre-aligner used in semiconductor manufacturing, handling 6-inch wafers.

The Brooks / PRI VAC 407 2 A is an ion implanter.

The Brooks Dual Stocker 1500 is a reticle stocker for 200 mm (8 inch) reticles, manufactured by Brooks.

The Brooks Fixload 6 Load Port is a semiconductor equipment load port by Brooks Automation, documented in limited public sources.

The Brooks / PRI ABM / ATM 407 B is an atmospheric wafer handling robot described as a single-arm system.

The Brooks 112910 Robot Teach Pendant is a Brooks-manufactured robot teach pendant identified by part number 112910.

Brooks Automation 1-0125 is an ATR-8 wafer transfer robot.

The Brooks EK-7J is a medium-profile meter interbase adapter with a depth of 3.5 inches, designed for meter form 16S.

The Brooks LP-K4 is a low-profile K-base conversion adapter that converts self-contained K-base meter enclosures to socket enclosures.

The Brooks R AR-7JR-G2 is a right angle adapter for installations that are difficult to read due to awkward location or obstructed view. The Brooks R AR-7JR-G2 places the meter at an 85° angle and can be read left or right.

The Brooks EDC 2400 / 2800 Robot Controller is a dual-arm robot controller.

The Brooks EK-13J is a medium-profile 3.5-inch meter interbase adapter. The Brooks EK-13J is designed to accommodate whole-house disconnect switches, PC boards, surge suppression equipment, communication interfaces, and recording devices.

Brooks EK-5J is a medium-profile 3.5-inch meter interbase adapter in the EK Series.

The Brooks EK-6J is a medium-profile meter interbase adapter with a 3.5 inch depth.

The Brooks EK-8J is a medium-profile 3.5-inch-depth meter interbase adapter. The Brooks EK-8J accommodates interface devices such as whole house disconnect switches, PC boards, surge suppression equipment, communication interfaces, and recording devices.

The Brooks EKD-4J is a deep profile meter interbase adapter designed for applications requiring extra space to accommodate additional components and devices.

The Brooks EKD-6J is a deep-profile meter interbase adapter with a 5.25-inch depth. The Brooks EKD-6J is designed for applications requiring extra space to accommodate additional capability and more active components and devices.

The Brooks EKD-7J is a deep-profile meter interbase adapter with a 5.25-inch depth. The Brooks EKD-7J is designed for applications requiring extra space to accommodate additional capability and more active components and devices.

The Brooks EKD-8J is a deep profile meter interbase adapter with 5.25-inch depth, designed for applications requiring extra space for additional components and devices.

The Brooks R A-4JR-G2 is a right angle adapter for meter installations that are difficult to read due to awkward location or obstructed view.

General referenceThe Brooks Wafer is a wafer probing system used for electrical testing of semiconductor devices at the wafer level.

The Brooks Series 8 Robot Controller is a Brooks controller identified in public product listings and inventory records as part of Brooks Automation's Series 8 line.

Brooks EK-4J is a medium-profile (3.5" depth) meter interbase adapter for form 2S sockets.

Brooks R AL-7JR-G2 is a right angle adapter for installations that are difficult to read due to awkward location or obstructed view.

Brooks LP-K4-UL is a K-base conversion adapter described as a bottom-fed K4 model.

Brooks LP-K7 is a K-Base conversion adapter listed in the Brooks 2024 product catalog.

Brooks K4 to CT is a single-phase K-to-CT conversion kit for converting K-base installations over 320A to transformer-rated services.

The Brooks K7 to CT conversion kit converts three-phase K-base meter installations over 320 amperes to transformer-rated services.

The Brooks LP-4J is a low-profile meter interbase adapter with 1.2 inch depth, designed for communication cable routing, monitor equipment, and service provider access.

Brooks LP-5J is a low-profile meter interbase adapter with a 1.2-inch depth. Brooks LP-5J is designed for communication cable routing, monitor equipment, and service provider access.

The Brooks LP-6J is a low-profile meter interbase adapter with a 1.2-inch depth.

The Brooks LP-7J is a low-profile meter interbase adapter with a 1.2-inch depth.

The Brooks LP-8J is an LP Series meter interbase adapter with a low-profile 1.2-inch depth. The Brooks LP-8J is designed for communication cable routing, monitor equipment, and service provider access.

The Brooks EKD-5J is a deep-profile meter interbase adapter with a 5.25-inch depth. The Brooks EKD-5J is designed for applications requiring extra space to accommodate additional capability and active components.

The Brooks R A-8JR-G2 is a Right Angle Adapter designed for meter interbase installations that are difficult to read due to awkward location or obstructed view.

The Brooks R AR-13JR-G2 is a right angle meter adapter designed for installations that are difficult to read due to awkward location or obstructed view.

The Brooks R AL-13JR-G2 is a right-angle adapter designed for installations that are difficult to read due to awkward location or obstructed view. The Brooks R AL-13JR-G2 places the meter at an 85° angle and reads left or right.

The Brooks / PRI DBM 2406 is an atmospheric wafer handling robot with dual arm configuration.