ESPEC

BTZ 175

ESPEC BTZ 175 family

Research Quality: 40% complete

LinkedIn X Email

BTZ 175 — Inventory photo — Fig. 01BTZ 175Inventory photo^[1]

What it is

The BTZ 175 is a Criterion Benchtop chamber from ESPEC.^[3]^[4]^[2]

What do the numbers mean?

Power & electrical2

Full Load Amp: 14^[2]
Power: 208/230V 1ph 60Hz (NEMA 6-20 plug) 20 Service Amps^[3]2 sources

Dimensions & facilities2

Interior dimensions: 19.6" x 11" x 12" (500 x 280 x 300 mm)^[3]2 sources
Exterior dimensions: 30.25" x 33.5" x 34" (770 x 850 x 865 mm)^[3]2 sources

Configuration & options19

Temperature Range: -123°C - 304°C^[1]
Largest Motor FLA: 3.7^[1]
Maximum Capacity Allowed: 20^[1]
Model: BTZ 175^[1]
Make: ESPEC^[1]
Product family: Criterion benchtop chamber^[3]2 sources
Temperature range: -123°C to 304°C^[1]
Interior volume: 1.5 cu. ft. (42 liters)^[3]2 sources
Temperature range: -70 to 180°C (-94 to 354°F)^[3]
Average change rate: 5°C/min (empty, per IEC 60068 3-5, at supply sensor)^[3]
Heat to room: 9,000 BTU/Hr.^[3]
Maximum sound level: 65 dBA (1 meter away)^[3]
Temperature fluctuation: ±0.5°C^[3]
Temperature gradient: ±1.5°C (below 100°C)^[3]
Temperature range: -123°C to 304°C^[1]
Temperature range: -70 to 180°C (-94 to 354°F)^[3]
Average change rate: 5°C/min (empty, per IEC 60068 3-5, at supply sensor)^[2]
Temperature fluctuation: ±0.5°C^[3]
Temperature gradient: ±1.5°C (below 100°)^[3]

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Full Load Amp14^[2]
Power208/230V 1ph 60Hz (NEMA 6-20 plug) 20 Service Amps^[3]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What is the interior volume of the BTZ 175?

The BTZ 175 has an interior volume of 1.5 cubic feet, or 42 liters.^[3]^[2]^[4]

What are the interior and exterior dimensions of the BTZ 175?

The BTZ 175 interior dimensions are 19.6 inches by 11 inches by 12 inches, and the exterior dimensions are 30.25 inches by 33.5 inches by 34 inches.^[3]^[2]^[4]

What electrical supply does the BTZ 175 use?

The BTZ 175 uses 208/230 volt single-phase 60 hertz power with a NEMA 6-20 plug and 20 service amps.^[3]^[2]

What temperature change rate is given for the BTZ 175?

The BTZ 175 has an average change rate of 5 degrees Celsius per minute, measured empty per IEC 60068 3-5 at the supply sensor.^[3]^[4]^[2]

Not publicly documented

The following facts about the BTZ 175 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the BTZ 175 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the BTZ 175 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the BTZ 175 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the BTZ 175 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the BTZ 175 is not on record.
Answerable by: an OEM datasheet or a fab qualification report