MPM
Ultraprint 2000 Series
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The MPM Ultraprint 2000 Series is a screen printer for SMT assembly. The UP 2000/B variant has a maximum plate size of 20 by 20 inches and uses a CRT monitor with an internal PC.[1]
What it is
How it works
General reference — not yet source-verifiedA screen printer uses a stencil, a squeegee, and controlled paste transfer to place solder paste on selected circuit-board sites.
The printer aligns the board and the stencil so paste lands on the intended pads with repeatable registration.
Where it fits in the process flow
General reference — not yet source-verifiedA screen printer sits at the front end of an SMT assembly line, before component placement and solder reflow.
The printer prepares solder paste deposits that downstream placement equipment and reflow soldering use to form electrical and mechanical joints.
Applications
The Ultraprint 2000 Series belongs to assembly / SMT equipment.[3]
What do the numbers mean?
Vacuum & pumping1
Control & software2
Dimensions & facilities1
Configuration & options6
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| UP 2000/B | — | — | — | smtnet.com[1] |
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Additional featuresvacuum underwipe[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the Ultraprint 2000 Series are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Ultraprint 2000 Series are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the Ultraprint 2000 Series are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Ultraprint 2000 Series are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Ultraprint 2000 Series is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the Ultraprint 2000 Series are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]smtnet.com — smtnet.comsmtnet.com
- [2]Inventory photo
- [3]waferpedia.com — waferpedia.comwaferpedia.com
Last updated Oct 8, 2026.
Compare with similar tools
View all →The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.
