Nordson
XD 7600 NT
The Nordson / Dage XD 7600 NT is an X-ray inspection system. The XD 7600 NT provides feature recognition below 0.1 µm. The XD 7600 NT uses a sealed-transmissive X-ray tube.[1][2]
What it is
How it works
Where it fits in the process flow
The XD 7600 NT supports non-destructive inspection of electronic assemblies, semiconductor packages, advanced PCBs, and precision electromechanical components.[1]
Applications
The XD 7600 NT is used for component fault analysis, plated through hole fill calculation, and die attach or area void calculation.[2]
The XD 7600 NT is used for inspection of solder joints, underfill regions, wire-bonded dies, MEMS packages, ceramic hermetic enclosures, and advanced printed circuit boards.[1]
What do the numbers mean?
Power & electrical4
Optics & imaging6
Control & software3
- Includes HDD and Software[3]
Dimensions & facilities2
Configuration & options10
- 3 Wire P-N-E[4]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What is the maximum X-ray tube voltage of the XD 7600 NT?
What is the maximum sample mass allowed in the XD 7600 NT?
The maximum sample mass is 5 kg.[7]
What is the feature recognition resolution of the XD 7600 NT?
The feature recognition resolution is below 0.1 µm.[5]
What type of X-ray tube does the XD 7600 NT use?
The system uses a sealed-transmissive X-ray tube, specifically the NT100 model.[5]
Not publicly documented
The following facts about the XD 7600 NT are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the XD 7600 NT are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the XD 7600 NT are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the XD 7600 NT are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the XD 7600 NT are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the XD 7600 NT is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (7)Every fact above is drawn from these public sources
- [1]instrumenthive.com — instrumenthive.cominstrumenthive.com
- [2]cohpros.com — cohpros.comcohpros.com
- [3]Inventory photo
- [4]Inventory photo
- [5]waferpedia.com — waferpedia.comwaferpedia.com
- [6]Nordson XD 7600 NT family | Waferpedia — waferpedia.comwaferpedia.com
- [7]https://data2.manualslib.com/cpdf/25/125/12456/0637ab.pdf — data2.manualslib.comdata2.manualslib.com
Last updated Oct 10, 2026.
Compare with similar tools
View all →The KLA .204 PSL Wafer is an 8-inch NIST-traceable reference wafer compatible with Surfscan 6xy0 and Sp1 particle counters.
KLA .496 PSL Wafer is an 8-inch NIST traceable wafer stated to be capable on Surfscan 6xy0 and SP1.
The KLA .498 PSL Wafer is a NIST traceable reference wafer.
