Speedline
Electra 500 F Wave Soldering
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Speedline Electra 500 F is a wave soldering machine designed for printed circuit board (PCB) assembly processes. The Speedline Electra 500 F features a ServoJet spray fluxing system, Vectaheat forced convection preheat, and a dual wave nozzle with UltraFill and Rotary chip waves.[1]
How it works
The Speedline Electra 500 F applies flux using a ServoJet spray fluxing system that incorporates FluxJet technology. The machine then preheats the board using Vectaheat forced convection preheat. Soldering is performed by a dual-wave nozzle assembly: an UltraFill main wave with FloLift technology and a non-clogging Rotary chip wave with FloLift.[1]
The machine offers recipe-driven solder pot height adjustment for automatic lead clearance and a recipe-driven automatic width adjustment conveyor system. A wet finger cleaning system maintains the conveyor fingers during operation.[1]
Applications
The Speedline Electra 500 F is configured for lead-free wave soldering, supporting the assembly of PCBs with lead-free solder alloys. The dual-wave design accommodates both conventional through-hole joints and chip components requiring a turbulent chip wave followed by a smooth lambda wave.[1]
What do the numbers mean?
Power & electrical1
Control & software1
Dimensions & facilities1
Configuration & options6
- Wave Nozzle System
- Dual wave: UltraFill main wave with FloLift and Rotary chip wave with FloLift[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Power Supply3 Phase, 480 V[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What is the maximum board width the Electra 500 F can process?
The machine supports process widths from 50 mm (2 inches) up to 508 mm (20 inches).[1]
What type of fluxing system does the machine use?
The Electra 500 F uses a patented ServoJet spray fluxing system with FluxJet technology.[1]
What preheat technology is employed?
Preheating is provided by Vectaheat forced convection preheat technology.[1]
Is the machine capable of lead-free soldering?
Yes, the Electra 500 F is configured for lead-free wave soldering.[1]
What is the overall length of the machine?
The machine length is 3823 mm (approximately 150.5 inches).[1]
Not publicly documented
The following facts about the Electra 500 F Wave Soldering are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Electra 500 F Wave Soldering are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Electra 500 F Wave Soldering are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Electra 500 F Wave Soldering are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Electra 500 F Wave Soldering are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Electra 500 F Wave Soldering is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]exapro.com — exapro.comexapro.com
- [2]Inventory photo
Last updated Sep 24, 2026.
Compare with similar tools
View all →The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.
