Waferpedia

YES

450 PB 12-2 CP Polyimide

Thermal / DiffusionYES 450 family
Research Quality: 40% complete

The YES 450 PB 12-2 CP Polyimide is a polyimide bake oven in the Thermal / Diffusion category. The YES 450 PB 12-2 CP Polyimide runs on 3-phase, 50/60 Hz, 208 VAC power and draws 19 amps.[1][2]

450 PB 12-2 CP Polyimide — Inventory photo
Fig. 01450 PB 12-2 CP PolyimideInventory photo[1]

What it is

The YES 450 PB 12-2 CP Polyimide is a polyimide bake oven. The model is in the thermal and diffusion equipment category.[2]

How it works

The YES 450 PB 12-2 CP Polyimide operates from three-phase power at 208 VAC and 50/60 Hz, with a current draw of 19 amps.[1][2]

What do the numbers mean?

Power & electrical5

Phase
3 Phase[1]
Accurate?
50/60 Hz[1]
Accurate?
Voltage
208 VAC[1]
Accurate?
Current
19 Amps[1]
Accurate?
Frequency
50/60 Hz[1]
Accurate?

Configuration & options3

Type
Polyimide bake oven[1]
Accurate?
Category
Thermal / Diffusion[2]
Accurate?
Product family
YES 450 family[2]
Accurate?
Interested in this tool?
Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

  • Phase3 Phase[1]
  • Configuration50/60 Hz[1]
  • Voltage208 VAC[1]
  • Current19 Amps[1]
  • Frequency50/60 Hz[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What is the Yes 450 PB 12-2 CP?

It is a polyimide bake oven.[1]

Not publicly documented

The following facts about the 450 PB 12-2 CP Polyimide are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

  • No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 450 PB 12-2 CP Polyimide are on record.

    Answerable by: OEM historical records or a trade-press announcement

  • No publicly documented variants, configuration options, or revision breakpoints of the 450 PB 12-2 CP Polyimide are on record.

    Answerable by: an OEM product catalog or an engineer who ordered or specified the tool

  • The control-system platform and OS era of the 450 PB 12-2 CP Polyimide are not on record.

    Answerable by: an engineer who operated it or OEM installation records

  • No publicly documented failure modes or field errata for the 450 PB 12-2 CP Polyimide are on record.

    Answerable by: a field service engineer, process engineer, or maintenance technician

  • The process node or technology generation of the 450 PB 12-2 CP Polyimide is not on record.

    Answerable by: an OEM datasheet or a fab qualification report

No research found yet — worked with this tool? Share what you know.

Sources & citations

Sources (2)Every fact above is drawn from these public sources
  1. [1]Inventory photo
  2. [2]waferpedia.com — waferpedia.comwaferpedia.com
Was this page accurate?

Last updated Oct 10, 2026.

Compare with similar tools

View all →